Mobile
Log In Sign Up
Home > chinese-english > "pressing temperature" in English

English translation for "pressing temperature"

压制温度
Example Sentences:
1.Effect of hot - pressing temperature and natural curing time on properties of fast - curing cement particle board
热压温度和养护时间对快速固化水泥刨花板性能的影响
2.Under the same conditions of hot - pressing time , composite density , pe ratio , and resin content , the optimum properties of the composites can be obtained when hot - pressing temperature is 190 degrees c
当在热压时间、聚乙烯比例、施胶量、复合材料密度相同的条件下,热压温度为190时压制出的麦秸聚乙烯复合板材各项物理力学性能较好。
3.An experiment was conducted to study the effects of hot - pressing temperature on properties of wheat straw - plastic composites made from wheat straw and recycled polyethylene ( pe ) using isocyanate as adhesive through multi - factor orthogonal experiment and single - factor experiment
摘要通过正交试验和单因子试验,以麦秸和废旧聚乙烯塑料为原料,使用异氰酸酯胶黏剂压制麦秸塑料刨花板,分析热压温度对麦秸聚乙烯复合材料性能的影响。
4.The experimental results demonstrate that the suitable mea hot - pressing temperature and pressure are 120 and 15 . 5mpa , respectively . the optimum catalyst loading in anode is 4 mg pt / cm2 , and the best contents of nafion ionomer in anode and cathode layer are 45wt % and 35 . 3wt % , respectively
实验结果显示,制备膜电极时最佳的热压温度和压力分别为120和15 . 5mpa ;阳极催化剂的适宜载量为4mgpt / cm2 ;阳极和阴极催化剂层的nafion最优含量分别为45 . 0wt %和35 . 3wt % 。
5.On the same condition of hot - pressing time , hot - pressing temperature and density of composite , the optimum properties of composite were obtained when recycled polypropylene content is 40 % by using mdi as coupling agent and recycled polypropylene content is 50 % by using ma as coupling agent
在热压时间、热压温度、复合材料密度相同的条件下,用异氰酸酯(简称mdi )作偶联剂,聚丙烯用量40 %时复合材料的性能最佳;而用马来酸酐(简称ma )作偶联剂,聚丙烯用量50 %时复合材料的性能最佳。
Similar Words:
"pressing speed" English translation, "pressing stand with a vacuum" English translation, "pressing stem" English translation, "pressing strength" English translation, "pressing task" English translation, "pressing the legs against the forehead" English translation, "pressing time" English translation, "pressing type moulding machine" English translation, "pressing with fist" English translation, "pressing with oblique punch" English translation